![](/images/new-backgrounds/1137706/13770647x1.webp)
3. Using the Unit
6.Check the measurement results.
The measurement results are automatically stored in the memory. (Refer to Chapter 3.5.)
Note: If “G” (Guest) was selected, the measurement results are not stored in the memory.
Warning:
If the
or ![](/images/new-backgrounds/1137706/13770647xi4.webp)
symbols are displayed
SYS
DIA
Pulse
Please repeat measurement. In some cases it may not be possible to take measurement correctly.
• If
is displayed
Incorrect posture during measurement. Sit correctly and take the measurement again. (Refer to Chapter 3.3.4.)
Note: The symbol will disappear in a few seconds, but may appear again depending on the cuff angle at the time.
• If is displayed
Movement during measurement. Keep still and repeat the measurement.
24