How to Disinfect

The Micro-Air®nebulizer can be cleaned and disinfected easily because the Medication Bottle and the Mesh Cap can be removed from the Main Unit. The unit can

be disinfected with benzalkonium chloride.

1

Make 0.1% dilute solution using benzalkonium chloride, and soak the

 

Medication Bottle and Mesh Cap in the solution for 10 minutes.

2

Take the Medication Bottle and Mesh Cap out of solution

 

to rinse it with water.

3

Wipe off the remaining water for faster drying.

How to Replace the Mesh Cap

You can usually use the Mesh Cap for approximately 1 year (according to the test results of OMRON). However, this may vary depending on medication type and individual use and care. In some cases, the unit may not nebulize or may nebulize weakly even after disinfection is done.

If the unit does not nebulize or nebulizes poorly even after cleaning the Mesh Cap,

purchase a new Mesh Cap from your nearest Omron dealer or where you purchased your unit from. The part number is U22-4.

1Open the Mesh Cap.

Lift up the Mesh Cap by strongly applying your thumb on the brim.

4 If using commercial cleaners, follow manufacturers instructions.

Caution

Disinfect

5

Do not use disinfection solution containing sodium hypochlorite.

The following parts can be disinfected:

 

 

• The unit may not be able to be used after getting covered with rust.

to

 

Medication Bottle

How

 

 

Mesh Cap

 

 

 

 

Unit

 

Mask

the

 

Mouthpiece

DisinfecttoHow

 

 

Mouthpiece Adapter

 

 

2Remove the Mesh Cap from the Medication Bottle.

3Install a new Mesh Cap.

Insert a new Mesh Cap vertically.

Lift up the Mesh Cap vertically.

Close it securely.

How to Disinfect the Unit How to Replace the Mesh Cap

18

19

Page 10
Image 10
Omron NE-U22V instruction manual How to Disinfect, How to Replace the Mesh Cap, Following parts can be disinfected