Numeral Displays | Section | |
|
|
|
2-2 Numeral Displays
Values from numeral tables can be displayed on a screen. The numeral table entry to be referenced, the display position, and the manner of display are set. You can set a maximum of 50 numeral displays per screen.
For the NT20M, numeral table entries are numbered from 0 to 127, for a total of 128. For the NT600M, numeral table entries are numbered from 0 to 255, for a total of 256.
The procedure for setting number displays depends on whether or not direct connection is ON or OFF in the Tool Settings. Both procedures are given be- low.
2-2-1 Normal Numeral Displays
Select NUM DISP from the Initial Edit Display, the Initial Display for Numeral
Display will appear.
Initial Display for Numeral Display
Designating Numeral Table References
Inputting Initial Values
Only table number entries 0 to 13 are displayed first. To display the next en- tries, press the Pg Dn Key; to return to previous entires, press the Pg Up Key.
Select the numeral table entry that you want to reference and then press the Enter Key.
The initial value for the selected memory table reference is input next. Refer to page 12 for details on input methods. You can input numbers from ±99999999 to 99999999. Numeral displays can display decimal numbers, but you enter them here without the decimal point. For example, if you want to
28
