42
Inputting the Label If you set label to “Yes,” the following screen will be displayed. If you set label
to “No,” you will be returned to the Initial Lamp Display.
Input the label and press the Enter Key. You can also press the F3 Function
Key to input from a list of marks that have been created. Refer to page 22 for
details on the mark input procedure.
Note 1. Labels can be only one line long. Input character strings if longer labels
are required.
2. “@” will be input as the default label if the label setting is changed from
NO to YES.
Set the size and scale of the label display.
Position the label on the screen.
Deleting and Modifying You can delete or modify previously input lamp data on the screen. The pro-
cedures for these operations are the same as those for deleting and modify-
ing character strings. Refer to appropriate subsections of
2-1 Inputting Char-acter Strings
for details.
Lamps Section 2-4