Omron Healthcare HEM-705CP manual HOW to Apply the ARM Cuff

HOW TO APPLY THE ARM CUFF

1. If the cuff is assembled correctly, the	AU
	MODEL
	SYSTOLIC
hook material will be on the outside of	DIASTOLIC
the cuff loop and the metal D-ring will
not touch your skin.

PULS

2.If the cuff is not assembled, pass the end of the cuff furthest from the tubing through the metal D-ring to form a loop. The smooth cloth should be on the inside of the cuff loop.

Pile Side Material

Sewn Hook Material

3.Sit in a chair with your feet flat on the floor and place your arm on a table so that the cuff is at the same level as your heart.

4.Put your arm through the cuff loop. The bottom of the cuff should be approximately 1/2" above

the elbow. The Green Marker

on the cuff should lie over the brachial artery on the inside of the arm. Tube should run down center of arm approximately even

with middle finger.

D-Ring

Bottom Edge 1/2 Inch

Cuff Tube

Green Marker

13