Battery Replacement | Omron Healthcare HJA-301 specification

BATTERY REPLACEMENT

Low battery indicator

When the low battery indicator appears on the display, immediately replace the battery with a new CR2032 battery.

Blinking	Battery power is low.
Appears	Battery power exhausted.
continuously	The unit stops counting steps.

NOTES:

•Do not replace the battery around 12:00AM. The measurement results of the day when the battery was removed will be added to the measurement results for the day the battery was inserted.

(It is assumed that the battery will be removed and replaced with a new one on the same day.)

•The measurement results for calories and fat burned, and the number of steps are automatically stored in memory on the hour (e.g. at 12:00AM, 1:00AM, 2:00AM, ...

9:00PM, 10:00PM, 11:00PM).

The measurement results from the hour until the time the battery is replaced will be deleted for that day.

•When the battery is removed, the time will be reset to “12:00AM”. Reset the time after inserting the new battery. Refer to “Settings” on page 8.

(The measurement results stored in memory and the weight, height and stride length settings are not deleted.)

•The attached battery is for trial use. The battery life may be shorter.

22

Image 22

Omron Healthcare HJA-301 instruction manual Battery Replacement, Low battery indicator, 900PM, 1000PM, 1100PM

Contents

Model HJA-301 Table of Contents Date Purchased IntroductionFill-in for future reference Staple your purchase receipt here Active Engine FeaturesWorkout Mode Auto Stride Length Result in death or serious injury Important Safety InformationIndicates a potentially hazardous User or patient or damage to Replace a worn battery with a new one immediately Always remove the battery before disposing of the unit Back of the main unit Know Your UnitFront of the main unit Components That will not break easily SettingsSetting the TIME, WEIGHT, Height and Stride Length Button Hour flashes on the display All the settings are completed Setting the hourAutomatic stride length setting Stride Length Measurement Mode Press for 2 seconds to end Workout Press to start a workoutPress to confirm When Workout Mode is OFF When Workout Mode is onAttaching the Unit Attaching the Unit Workout indicator bar End a workout Using the UnitUsing the Workout Mode Start a workout Press to read the data refer to Simply bring the unit with you wherever you go Inconsistent walking pace When runningIrregular movement Excessive vertical movement or vibration About the Display About the Individual Displays Step count/Time display Time Calories burned/Fat burned display Workout Mode is OFF Changing the Display During Workout Mode To stop Workout Mode, press for 2 seconds at any time View the Same Display Screen for ALL Days Time must be correctly set in the unitData for the previous time or previous day are displayed View ALL Information for Each DAY Time is not displayed while viewing previous results Low battery indicator Battery Replacement900PM, 1000PM, 1100PM Following examples offer a guide to expected battery life Battery lifeAbout the Battery Saving Mode Sleep Mode Press , or to activate the display again Remove the old battery Do not throw the battery into fire. The battery may explode To Reset the Setup Data Using the System Reset FunctionTo Delete ALL DATA/ERASE in Memory Do not use any abrasive or volatile cleaners Care and MaintenanceClean the unit with a soft dry cloth This unit is a precision instrument. Handle it with care Troubleshooting Tips Displayed Occurred Refer to Err is Malfunction hasDo not operate normally Refer to Specifications FCC Statement Potential for RADIO/TELEVISION Interference for U.S.A. only Limited Warranty Visit our web site at Omron Healthcare, Inc Distributed by