![](/images/new-backgrounds/1137530/13753029x1.webp)
Extra Features
Macros (Sequence of commands)
Macros (Direct)
You can program your ONE FOR ALL 4 to issue a sequence of commands at the press of one button. Any sequence of commands you regularly use can be reduced to one key stroke for your convenience.
SAT/CBL
DVD
AMP/TUNER
Example: To switch off your Television, Satellite Receiver and DVD player with one keypress (e.g. red key):
1Press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice.
2Press 9 9 5.
3Then press the Red key to which the Macro will be assigned.
4Next press TV, OFF, SAT, OFF, DVD, OFF.
5To store the Macro, press and hold down the MAGIC key until the red LED underneath the last selected device key will blink twice. The red LED will blink once, then twice.
6Whenever you press the ”Red” key, the ONE FOR ALL 4 will switch off your Television, Satellite Receiver and DVD player.
-Make sure that you program a Macro on a spare key that you don’t use in any mode.
-Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, SAT, DVD and AMP) you are using.
-Each MACRO can consist of a maximum of 35 key strokes.
-If you had to hold down a key for a few seconds on the
original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote.
-To avoid accidental recordings with the ONE FOR ALL 4, you must press the Record key twice to begin recording. Because of this, we recommend you not to assign a Macro or Shifted Macro to the Record key.
-If you program a Macro on a key, the original function will become shifted (excluding REW, PLAY, PAUZE, FF, SKIP Forward, SKIP Back, STOP, REC, Red, Green, Yellow and Blue). Press the MAGIC then the key to access it.
WWW. ONEFORALL.COM | 15 |