One for All URC-3740 Code Blink out, Quick Code Reference, Red LED will blink once, then twice

Code Blink out

(To find out which code is currently programmed)

Once you have Set-Up your ONE FOR ALL 4, you can blink back your SET-UP CODE for future reference.

Example: To blink out your Television code:

1	Press TV once.
2	Press and hold down the MAGIC key
	(for approximately 3 seconds) until the
	red LED (underneath the TV key
	in this example) blinks twice.

The red LED will blink once, then twice. x2

3Press 9 9 0. The red LED underneath the TV key will blink twice.

4For the first digit of your four-digitcode, press 1 and count all the red blinks.

5For the second digit, press 2 and count all the red blinks.

6For the third digit, press 3 and count all the red blinks.

7For the fourth digit, press 4 and count all the red blinks.

Now you have your four-digit code.

-If there are no blinks, the digit is "0".

-If you are not sure how many times it blinked, simply press the corresponding digit again to repeat the blink-back.

Quick Code Reference

Device Type Code

1.__________________________________

2.__________________________________

3.__________________________________

4.__________________________________

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

10 WWW.ONEFORALL.COM