OFA Kam 6 Hybrid Owners Manual.fm Page 14 Wednesday, March 30, 2005 3:09 PM
OFA Kameleon™
NOTE: Please have your original remote controls handy before programming learning. Be sure to press each teaching key within 5 seconds of the previous entry. Otherwise, the OFA Kameleon™
PROGRAMMING A LEARNING KEY
1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.
2.Enter 9 7 5. The Inner IR Segments will blink twice.
3.Press a device key once (e.g., TV) to assign a mode for learning.
4.Press the desired key once (e.g., +100 Key) to store a feature to be learned. The unit will display the learning animation of the IR segments and will then turn off the screen
5.Place your original remote control (e.g., TV remote control)
2"
6.On your original remote control, press and hold the key (i.e., feature) to be learned until the display on the OFA Kameleon™
7.To learn functions onto other learning keys (e.g., M1, PG+,
8.To lock in new feature(s) on the OFA Kameleon™
SET.
9.To test a learned feature, press a device key (e.g., TV) once where the learning mode was assigned. Then press the learning key (e.g., +100) where the learned feature is stored.
DELETING FUNCTIONS FROM THE LEARNING KEYS:
1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.
2.Enter 9 7 6. The Inner IR Segments will blink twice.
3.Press the device key once where the learned feature is stored (e.g., TV).
4.Press the learning key (e.g., +100) to be deleted twice. The Inner IR Segments will blink twice after the second press.
5.To clear additional functions stored on other learning keys, repeat steps 1 through 4 (in this section).
RE-ASSIGNING DEVICE KEYS
The OFA Kameleon™
