![](/images/new-backgrounds/1164536/16453637x1.webp)
OFA Kam 6 Hybrid Owners Manual.fm Page 17 Wednesday, March 30, 2005 3:09 PM
control in TV mode, VCR volume in VCR mode, etc.).
1.On the remote control, press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.
1.Enter 9 9 3 and then press VOL+ once. The Inner IR Segments will blink four times.
Volume will again be independently controlled according to its default states for all programmed devices.
RESTORING FACTORY DEFAULT SETTINGS
The OFA Kameleon™
IMPORTANT. Executing this program erases all code settings and all custom settings including, Macros, Learned Keys, Reassigned Device Keys, Keymoved Keys, Favorite Channels, and all device settings.
1.On the remote control, press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.
2.Enter 9 8 1. The Inner IR Segments will blink four times.
Your remote is now ready for programming.
ABOUT UPGRADING
The OFA Kameleon™
OWNER’S MANUAL
remote control’s memory. If this happens, please contact our Customer Support department (see Troubleshooting Section below) to upgrade the remote control.
The Customer Support representative will search our entire database for a code that matches your device and instruct you how to enter it into your OFA Kameleon™ 6- Device Hybrid Remote
NOTE: One For All reserves the right to replace a returned remote control with a new one of equal or superior functionality.
UPGRADE EXCLUSIONS
•Home entertainment or home automation devices controlled by radio frequency (RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered.
•Home entertainment or home automation devices not controlled by remote controls.
•Broken or defective product.
•Products that operate over 100 kHz.
•Infrared keyboards and infrared pointing devices (such as mouse substitutes).
•All products for sale and/or use outside the continental United States, Hawaii, Alaska, or Canada.
Restoring Factory Default Settings 17