![](/images/new-backgrounds/1264604/26460461x1.webp)
Command Set Summary
Command | Description | OFF | ON | Remark | |
ru reboot | reboot Remote Radio |
| se |
|
|
ru speedtest [<packet length> | perform speedtest |
| se | default: | |
<file size>] | <pkt len> = 64..1760 bytes |
|
| <pkt len> = 1760 bytes | |
| <file size> = 10..100 Mbytes |
|
| <file size> = 10 MBytes | |
ru sysinfo | request Remote’s system information |
| se |
|
|
ru testrflink [<packet length>] | perform RF loopback test testrflink |
| se | default: | |
| <pkt len> = 64..1760 bytes |
|
| <pkt len> = 1760 bytes | |
reboot | reboot unit | se | se |
|
|
remarks [<str>] | string length should be 1 to 28 characters | se | se |
|
|
reset [<all 0…n>]… | reset radio to the firmware default | se |
|
|
|
| n# = 0..2 |
|
|
|
|
| Master: |
|
|
|
|
| 0 - Channel Table, Active Channel = 1 h, |
|
|
|
|
| Switches, and Remarks |
|
|
|
|
| 1 - TX Power = Max, RF Threshold = |
|
|
|
|
| dBm, Target RSSI = |
|
|
|
|
| Downstream = 10000 kbps, Upstream = |
|
|
|
|
| 10000 kbps |
|
|
|
|
| 2 - SNMP Community String (Read/Write) |
|
|
|
|
| = (public/private) |
|
|
|
|
| Remote: |
|
|
|
|
| 0 - Channel Table, Active Channel = 1 h, |
|
|
|
|
| Switches, and Remarks |
|
|
|
|
| 1 - TX Power = Max, RF Threshold = |
|
|
|
|
| dBm |
|
|
|
|
| 2 - SNMP Community String (Read/Write) |
|
|
|
|
| = (public/private) |
|
|
|
|
rfrxth <ism> | specify RF RX Threshold | se | se | default = | |
75 |
|
|
| band | |
rfrxthreshold … | same as “rfrxth” | se | se |
|
|
rssi | display current RX RSSI | se |
|
|
|
save | same as “updateflash” | se | se |
|
|
save mm | same as “updateflash mainimage” | se | se |
|
|
save ss | same as “updateflash systemsetting” | se | se |
|
|
set defaultopmode [<on off>] | set or display default Opmode | se | se |
|
|
set httpport [<port #>] | set or display HTTPD port number | se | se | default = 80 | |
set mir [<downstream, | set or display MIR | se | se |
|
|
kbps>][<upstream, kbps>] | <kps> = 100..10000 |
|
|
|
|
set rssitarget <dB> | set Target RSSI Threshold | se | se |
|
|
| It must be |
|
|
|
|
| than RF RX Threshold. |
|
|
|
|
set snmpcomm [<read write>] | display or assign SNMP community string | se | se |
|
|
set telnetport [<port #>] | specify telnet port, <port #> = 1..65534 | se | se | default = 23 | |
ssrssi <ch #> <v h> | display RSSI on the current channel | se |
|
|
|
survey <ism> <time, sec> <hv> | spectrum analysis of entire RF band | se |
|
|
|
sw 0 [<on off>] | set sw #0 – packet filter for | se | se | default = on | |
| broadcast/multicast |
|
|
|
|
sw 1 [<on off>] | set sw #1 – HTTPD service | se | se | default = on | |
sw 2 [<on off>] | set sw #2 – Auto scan Master signal | se | se | default = on | |
sw 3 [<on off>] | set sw #3 – Auto power leveling Remote | se | se | default = on | |
| Unit |
|
|
|
|
sysinfo | display system configuration | se | se |
|
|
temp | display current temperature | se | se |
|
|
|
|
|
|
|
|
Trango Broadband Wireless — |
|
| page 27 |