![](/images/new-backgrounds/1264604/26460421x1.webp)
Getting Started
Serial Port
Figure 5: Pin-outs for Serial Cable
Terminal Settings
Changing Password
Use the CLI command _password to change the password.
Syntax: _password <newpassword> <newpassword> example:
#> _password banana77 banana77 Update flash successful. Success.
If you forget the password, the only way to reset the password is via the serial interface according to the following procedure:
1.Connect your computer to the radio with the provided serial cable.
2.Open a HyperTerminal session on your computer.
3.Power cycle the radio.
4.While it is loading, you will be able to see this in HyperTerminal, press enter.
5.Type resetpassword.
6.Type main. This will continue the loader.
7.The password will be reset to trango.
Trango Broadband Wireless — | page 7 |