One for All URC-7556 warranty Search Method, Example To search for your TV code

Setting up the ONE FOR ALL 5

Search Method

--> If your device does not respond to the ONE FOR ALL 5 after you have tried all the codes listed for your brand.

--> If your brand is not listed at all.

The Search Method allows you to scan through all the codes contained in the memory of the ONE FOR ALL 5.

Example: To search for your TV code:

1

2

3

Switch your television on (not on standby) and aim your ONE FOR ALL at your TV.

Press the TV key on your ONE FOR ALL 5.

Press and hold down MAGIC until the ONE FOR ALL 5’s TV key blinks twice (the red LED underneath the TV key

will blink once and then twice).

4	Press 9 9 1. The TV key will blink twice.
5	Next, press POWER.
6	Aim the ONE FOR ALL 5 at your Television. Now press CH+ over
	and over, until your Television turns off (every time you press
	the CH+ key the ONE FOR ALL 5 will send out a POWER signal
	from the next code contained in the memory). You may have
	to press this key many times (up to 150 times) so please
	be patient. If you skip past a code, you can go to the previous
	code(s) by pressing the CH- key. Remember to keep pointing
	the ONE FOR ALL 5 at your Television while pressing this key.

7As soon as your television turns off, press MAGIC to store the code.

-Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key or the “TV-text off” key to switch your TV back on.

-If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code.

-To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2.

-If the original remote control of your Video recorder or DVD player does not have a POWER key, press PLAY instead of POWER during step 5.

WW W.ONEFORALL.COM 7