One for All URC-7556 warranty Colour and Brightness, Trouble-Shooting, Problem Solution

Extra Features

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)	= Press and release MAGIC	then hold Volume (+)
Colour (-)	= Press and release MAGIC	then hold Volume (-)
Brightness (+) = Press and release MAGIC		then hold Channel (+)
Brightness (-)	= Press and release MAGIC	then hold Channel (-)

Trouble-Shooting

Problem:	Solution:
Your brand is not listed	Try the search method on page 7.
in the code section?
The ONE FOR ALL does	A) Try all the codes listed for your brand.
not operate your	B) Try the search method on page 7.
device(s)?
The ONE FOR ALL is not	You may be using the wrong
performing commands	code. Try repeating the Direct
properly?	Set-Up using another code listed
	under your brand or start the
	search method over again to
	locate the proper code.
Problems changing	Enter the channel number
channels?	exactly as you would on your
	original remote.
Video not recording?	As a safety feature on your
	ONE FOR ALL, you must press
	the Record key twice.
The ONE FOR ALL does	Make sure you are using new
not respond after	batteries and are aiming the
pressing a key?	ONE FOR ALL at your device.
The device key does not	Replace batteries with 4 fresh,
blink when you press	new AAA/LR03” alkaline batteries.
a key?

WWW.ONEFORALL.COM 17