The Learning Feature

Important notes:

-During steps 2 - 7 (page 9), you have approximately 10 seconds to conduct each step. If there is a gap of more than 10 seconds between two steps, you will have to start again from step number 2.

-If you learn a function on a key, the original ONE FOR ALL feature automatically becomes shifted. You can press MAGIC then the key to access it (this excludes the Channel and Volume keys).

-The Learning feature is mode specific. Therefore you can place one learned fea- ture per mode on the same key.

-If a Shifted Learned function is placed on the Channel and Volume keys then Colour/Brightness will be sacrificed.

-The ONE FOR ALL 5 can learn approximately 25 – 40 functions.

-You can replace a learned function by placing another learned function on top.

-Learning should not be done in direct sunlight or under incandescent lights.

-Make sure you are using new batteries before following the instructions above.

-Upon changing the batteries, your learned functions will be retained.

Shifted Learning

You can also learn a function on a key of the ONE FOR ALL without sacrificing the original ONE FOR ALL function. A Shifted Learning function can also be put on any key EXCEPT for the following: Device keys, MAGIC key, Number keys. To install a Shifted Learning function, simply follow steps 1-8 on the previous page. During step 5, press MAGIC once before you press the key where you are placing the learned function.

To access the shifted function, press MAGIC and then the key you have learned on.

10

WWW.ONEFORALL.COM

Page 11
Image 11
One for All URC-7556 warranty Shifted Learning, Important notes