Onkyo CR-445 Basic Operations, Turning On the CD Receiver, Adjusting the Volume, Using Headphones

Basic Operations

Turning On the CD Receiver

To turn on the CD receiver, press the [ON/STANDBY] button on the CD receiver or remote controller. The STANDBY indicator goes off.

Press the [ON/STANDBY] button again to set the CD receiver to Standby. The STANDBY indicator lights up.

Adjusting the Volume

Turn the [VOLUME] control clockwise to increase the volume or counterclockwise to decrease it. You can also use remote controller’s VOLUME

[ ] / [ ] buttons.

Selecting the Input Source

Press the remote controller’s INPUT [ ] / [ ] buttons repeatedly in order to select the input source. On the CD receiver, press the [INPUT] button repeatedly. The input sources are selected in the following order.

Using Headphones

Turn down the volume, then connect your stereo headphones to the PHONES minijack.

The speakers output no sound while the headphones are connected.

Note:

When you select iPod as the input source, the headphones output no sound. If use headphones, connect it directly to iPod.

Muting the Sound

To mute the output of the CD receiver, press the remote controller’s [MUTING] button. The MUTING indicator flashes on the display.

To unmute the CD receiver, press the [MUTING] button again.

Tips:

While the CD receiver is muted:

•Turning the [VOLUME] control on the CD receiver or use the VOLUME [ ] / [ ] buttons on the remote controller will unmute the CD receiver.

•If you turn the CD receiver off and on, the CD receiver will be unmuted.

18