Onkyo CR-445 Selecting Preset Stations, 4Use the / buttons to select a preset, To select Press

Listening to the Radio—Continued

Selecting Preset Stations

You must store some presets before you can select them (see page 31).

1Tune into the station that you want to store as a preset.

2Press the [MENU / CLEAR] button, and then use the [ ] / [ ] buttons to select “Preset Write?”.

3Press [ENTER].

The preset number flashes.

To cancel the Preset write function at this point, press the [MENU / CLEAR] button.

4Use the [ ] / [ ] buttons to select a preset.

5To store the station, press [ENTER].

If no station has yet been stored to the selected preset, “Complete” appears and the station is stored.

If a station has already been stored in the selected preset, the message “Overwrite?” appears.

To overwrite the previously stored station, press the [ENTER] button.

To not overwrite the previously stored station, press the [MENU / CLEAR] button. If the message “Memory Full” appears, all the presets have been stored and you’ll need to erase some presets before you can store any more stations (see page 34).

6Repeat steps 1 to 5 to preset more radio stations.

1Use the [TUNER] or INPUT [ ] / [ ] buttons to select “FM” or “AM”.

The preset you selected the last time will still be selected.

2Use the [ ] / [ ] buttons to select a preset.

Press the [ ] button to select the previous preset. Press the [ ] button to select the next preset.

You can also use the number buttons to select presets.

To select: Press:

Folder # 8

Folder # 10

Folder # 34

used to enter numbers over 10.

You can also use the front panel controls.

1.Use the INPUT button to select “FM” or “AM”.

2.Use the PRESET [ ] / [ ] buttons to select a preset.

32