Onkyo CR-445 Listening to the Radio-Continued, Displaying FM/ AM Radio Information, About Presets

Listening to the Radio—Continued

Displaying FM/ AM Radio Information

Press the remote controller’s [DISPLAY] button repeatedly to display more radio information.

FM / AM Frequency

Preset name *

*If the selected preset has no name, “No Name” appears briefly and then the frequency is displayed. See “Naming Presets” on page 33.

Presetting FM Stations Automatically (Auto Preset)

With the Auto Preset function, you can automatically preset the FM radio stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. The Auto Preset function does not preset AM radio stations.

Auto Preset Caution!

Any existing presets will be deleted when the Auto Preset function is run.

1Press the [TUNER] or INPUT [ ] / [ ] buttons repeatedly until “FM” appears.

Make sure the FM antenna is positioned to achieve the best possible reception.

2Press the [MENU / CLEAR] button, and then use the [ ] / [ ] buttons to select “Auto Preset?”.

3Press [ENTER].

The confirmation message “Auto Preset??” appears.

To cancel the Auto Preset function at this point, press the [MENU / CLEAR] button.

4To start the Auto Preset function, press [ENTER].

Note:

Depending on your location, a preset may be stored with no station and you will hear only noise when you select it. In this case, delete the preset (see page 34).

Presetting FM / AM Stations Manually

With the Preset Write function, you can manually preset individual FM and AM radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations.

FM stations can also be preset automatically (see page 31).

About Presets

•You can store up to 40 stations as presets and this can be any combination of FM and AM stations. For example, 27 FM and 13 AM or 32 FM and 8 AM.

•Although FM and AM presets share the same numbers, they’re selected independently. For example, preset #1 will store an FM station when the FM band is selected, and an AM station when the AM band is selected.

•Stations can be stored to presets in any order. For example, you could store preset #5 first, #1 second, and so on.

31