Using the Timers—Continued
3If you selected FM or AM, use the [ ] / [ ] buttons to select the radio preset, and then press [ENTER].
4Use the [ ] / [ ] buttons to select Once or Every, and then press [ENTER].
Select “Once” for
5If you selected “Once”, use the
[ ] / [ ] buttons to select the day, and then press [ENTER].
You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.
Skip to step 8.
6If you selected “Every”, use the
[ ] / [ ] buttons to select the day, “Everyday”, or “Days Set”, and then press [ENTER]. If you selected other than “Days Set”, skip to step 8.
You can select the followings:
MON TUE WED THU FRI
SUN Days Set Everyday SAT
7If you selected “Days Set”, use the [ ] / [ ] buttons to select the first day, and then press [ENTER].
Use the [ ] / [ ] buttons again to select the last day, and then press [ENTER].
You can select only consecutive days.
8Use the [ ] / [ ] buttons to specify the On time, and then press [ENTER].
You can also use the remote controller’s number buttons to enter the time. For example, to enter 7:29, press [7], [2], and [9].
Notes:
•Once the On time is set, the Off time is automatically set to one hour later.
•Use the remote controller’s [ > 10] button to select A.M. or P.M.
9Use the [ ] / [ ] buttons to specify the Off time, and then press [ENTER].
10 Use the [ ] / [ ] buttons to specify the CD receiver’s volume level, for the timer setting, and then press [ENTER].
To keep the latest volume level for the timer setting, press [ ] button repeatedly until “TimerVol.Lst” appears on the display and set.
11 Timer indicator 1, 2, 3, or 4 will light
up.
Timer
Number of programmed timer
Press the [ON/STANDBY] button to set the CD receiver to Standby.
Notes:
•Be sure to set the CD receiver to Standby, otherwise the timed operation will not work.
•While a timed operation is in progress, you can cancel it by pressing the [TIMER] or [SLEEP] button.
To return to step 1 and start timer programming all over again, press the [MENU / CLEAR] button at any point in this procedure.
38