Onkyo CR-445 Turning Timers On and Off, Checking Timer Settings, Using the Sleep Timer

Using the Timers—Continued

Turning Timers On and Off

Once a timer has been programmed, you can turn it on or off as necessary. For example, while you’re on holiday, you may want to turn off the timer you use as an early-morning alarm.

1Press the [TIMER] button repeatedly to select timer 1, 2, 3, or 4.

2Use the [ ] / [ ] buttons to select “Timer On” or “Timer Off”.

The timer numbers, which set “Timer On” light up. After a few moments, the previous display reappears.

Checking Timer Settings

1Press the [TIMER] button repeatedly to select timer 1, 2, 3, or 4, and then press [ENTER].

2Press [ENTER] repeatedly to see all of the timer’s settings.

Notes:

•You can change the settings by using the [ ] / [ ] buttons.

•If you change the settings of a timer

that is off, that timer will be turned on. After confirming all the settings, the previous display reappears.

To return to the previous display at any point in this procedure, press the [MENU / CLEAR] button.

Using the Sleep Timer

With the sleep timer, you can set the CD receiver so that it automatically turns off after a specified period.

Press the [SLEEP] button repeatedly to select the required sleep time.

With the [SLEEP] button, you can set the sleep time from 90 to 10 minutes in 10 minute decrements.

Use the [ ] / [ ] buttons to set the sleep time in 1 minute increments from 99 to 1.

SLEEP indicator

When the sleep timer has been set, the SLEEP indicator appears on the display, as shown. The sleep time appears on the display for about 8 seconds, then the previous display reappears.

Checking the Remaining Sleep Time

To check the remaining sleep time, press the [SLEEP] button.

Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Cancelling the Sleep Timer

To cancel the sleep timer, press the [SLEEP] button repeatedly until “Sleep Off” appears, then the SLEEP indicator disappears.

39