Note
•The effect of the Late Night function depends on the material that you are playing and the intention of the original sound designer, and with some material there will be little or no effect when you select the different options.
•The Late Night function can be used only when the input source is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
•The Late Night function is set to “Off” when the AV receiver is set to Standby. For Dolby TrueHD sources, it will be set to “Auto”.
Music Optimizer
■Music Optimizer
`Off
`On
Turn this setting on to enhance the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3.
Tip
•Alternatively, you can use the AV receiver’s MUSIC OPTIMIZER.
Note
•The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48 kHz and analog audio input signals. The Music Optimizer is disabled when the Direct listening mode is selected.
•The setting is stored individually for each input selector.
•The M.Opt indicator will light (➔ page 8).
CinemaFILTER
■Cinema Filter
`Off
`On
Turn this setting on to soften overly bright movie soundtracks, which are typically mixed for reproduction in a movie theater.
CinemaFILTER can be used with the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic II Movie, Multichannel, DTS, DTS Neo:6 Cinema, DTS 96/24,
Note
•The CinemaFILTER may not work when used with certain input sources.
En
37