Onkyo HT-RC160 Zone 2-Continued, Using Zone, Controlling Zone 2 from the AV receiver, lights up

Zone 2—Continued

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the AV receiver

ZONE 2 OFF

INPUT SELECTOR

1	To turn on Zone 2 and select an
	input source, press the [ZONE 2]
	button followed by an input
	selector button within 8 seconds.
	Zone 2 turns on, the ZONE 2 indicator
	lights up.
	To select AM or FM press the
	[TUNER] input selector button repeat-
	edly.
	To select the same source as that of the
	main room, press the [ZONE 2] button
	repeatedly until “Z2 Selector: Source”
	appears on the display.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
2	will be heard in each room.
	To turn off Zone 2, press the
	[OFF] button.

Controlling Zone 2 with the Remote Controller

ON/ ZONE2

STANDBY

INPUT

SELECTOR

Note:

To control Zone 2, you must press the remote control- ler’s [ZONE 2] button first.

1	Press the [ZONE 2] button, then
	point the remote controller at the
	AV receiver and press the [ON/
	STANDBY] button.
	Zone 2 turns on, the ZONE 2 indicator
	lights up.

2	To select an input source for
	Zone 2, press the [ZONE 2]
	button, followed by an INPUT
	SELECTOR button.

To select AM or FM press the [TUNER] INPUT SELECTOR button repeatedly.

Note:

You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room.

3	To turn off Zone 2, press the
	[ZONE 2] button, followed by the
	[ON/STANDBY] button.

84