Onkyo HT-RC160 instruction manual FM/AM Frequency Step Setup, The “Tuner” menu appears, 50kHz/9kHz

First Time Setup—Continued

FM/AM Frequency Step Setup

For FM/AM tuning to work properly, you must specify the FM/AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

7. Hardware Setup

1.Remote ID

2.Tuner

3.HDMI

3	Use the Up and Down [q]/[w] but-
	tons to select “2. Tuner”, and
	then press [ENTER].
	The “Tuner” menu appears.
	7–2. Tuner
	FM/AM Frequency Step	200kHz/10kHz

4 Use the Left and Right [e]/[r]

buttons to select: 200kHz/10kHz:

Select if 200 kHz/10 kHz steps are used in your area.

50kHz/9kHz:

Select if 50 kHz/9 kHz steps are used in your area.

5	Press the [SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

43