The beginning of audio received by an HDMI IN can’t be heard

Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio

 

signals, audio output may not start immediately.

 

Video

There’s no picture

Make sure that all video connecting plugs are pushed

16

in all the way.

 

 

 

Make sure that each video component is properly

17, 18

connected.

 

If your TV is connected to the HDMI OUT, select

44

- - - - - in the “HDMI Input” setup to watch

 

composite video, S-Video and component video

 

sources.

 

 

 

If the video source is connected to a component

18, 44

video input, you must assign that input to an input

 

selector, and your TV must be connected to either

 

the HDMI OUT or COMPONENT VIDEO

 

MONITOR OUT.

 

If the video source is connected to a composite video

18

input, your TV must be connected to the HDMI

 

OUT or the corresponding composite video output.

 

 

 

If the video source is connected to an HDMI input,

17, 44

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

 

 

While the Pure Audio listening mode is selected, the — video circuitry is turned off and only video signals input through HDMI IN can be output.

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is

86

not guaranteed. In addition, video signals from a PC

 

are not guaranteed.

 

 

 

When the resolution is set to any resolution not

44

supported by the TV, no video is output from the

 

HDMI outputs.

 

If the message “Resolution Error” appears on the

AV receiver’s display, this indicates that your TV

 

does not support the current video resolution and

 

you need to select another resolution on your DVD

 

player.

 

The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver is not connected to a TV via — HDMI, onscreen menus are not displayed.

The on screen display does not appear

Depending on the input signal, the on screen display 57 may not appear when the input signal from the

HDMI IN is output to a device connected to the

HDMI OUT.

En

74

Tuner

Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

Move the AV receiver away from your TV or

computer.

 

Listen to the station in mono.

28

 

 

When listening to an AM station, operating the

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

 

 

Concrete walls weaken radio signals.

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

The remote controller doesn’t work

Before operating this unit, be sure to press

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote

11, 68

controller mode.

 

 

 

When using the remote controller to control other

manufacturers’ AV components, some buttons may

 

not work as expected.

 

Make sure you’ve entered the correct remote control

67

code.

 

 

 

Make sure to set the same ID on both the AV

57

receiver and remote controller.

 

 

 

Can’t control other components

If it’s an Onkyo component, make sure that the u

20

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t be enough.

 

 

 

Make sure you’ve selected the correct remote

11, 68

controller mode.

 

For a proper operation of the remote controller as a

41

cassette tape deck is connected to the TV/CD IN

 

jack, or as an RI Dock is connected to the TV/CD

 

IN, VCR/DVR IN or GAME IN jacks, you must set

 

the input display accordingly.

 

 

 

If you cannot operate it, you will need to enter the

67

appropriate remote control code.

 

To control another manufacturer’s component, point

67

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected

67

via u, point the remote controller at the AV

 

receiver. Be sure to enter the appropriate remote

 

control code first.

 

 

 

Page 74
Image 74
Onkyo HT-RC370 instruction manual Video, Tuner, Remote Controller

HT-RC370 specifications

The Onkyo HT-RC370 is a versatile and feature-rich AV receiver designed to enhance the home theater experience. Launched as a part of Onkyo’s acclaimed lineup, this receiver provides high-quality audio and video processing capabilities to satisfy both casual viewers and audiophiles alike.

One of the main features of the HT-RC370 is its support for both 7.2 channel surround sound and multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio. This ensures immersive soundscapes for movies, music, and games, delivering a cinema-like experience right at home. The receiver offers a potent 100 watts per channel, which guarantees powerful sound output, making it suitable for various room sizes.

The HT-RC370 takes advantage of Onkyo’s advanced audio processing technologies, such as Audyssey MultEQ room correction. This system analyzes the acoustics of the space and automatically adjusts the speakers for optimal sound performance, significantly improving overall sound quality. Additionally, the receiver supports two subwoofers, enhancing low-frequency performance and creating a more balanced sound stage.

In terms of connectivity, the Onkyo HT-RC370 features an extensive range of options. It includes multiple HDMI inputs and outputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all while supporting 3D video and 4K upscaling capabilities. Other connectivity options include analog and digital audio inputs, as well as components like USB ports for easy access to music files.

An intuitive GUI (Graphical User Interface) enhances usability, and it provides straightforward control for both audio and video settings. The receiver also includes built-in network capabilities for streaming music from various online sources, such as Spotify and Pandora, providing flexibility for music lovers.

In summary, the Onkyo HT-RC370 combines robust features, advanced audio technologies, and extensive connectivity options to create an exemplary audio-visual experience. Whether you are hosting movie nights or enjoying your favorite music, this receiver provides the power, performance, and flexibility needed to elevate any entertainment setting.