3 When you’ve finished making the settings, press

ENTER.

MultEQ XT: Auto Setup

 

AUDYSSEY

Speakers Type(Front)

Normal

Powered Zone 2

No

Subwoofer

Yes

Perform the “Speaker Setup” according to your speaker configuration:

–Speakers Type(Front) (➔ page 46)

–Powered Zone 2 (➔ page 46)

–Subwoofer (➔ page 46)

If you use a powered subwoofer(s), go to step 4. If not, go to step 5.

When an optional unit is connected to the UNIVERSAL PORT jack on the AV receiver, the optional unit setting may appear on the speaker setting menu.

4 Adjust the subwoofer volume level to 75 dB.

Test tones are played through the subwoofer. Use the volume control on the subwoofer.

Note

•If your subwoofer does not have a volume control, disregard the level displayed and press ENTER to proceed to the next step.

•If you set the subwoofer’s volume control to its maximum and the level displayed is lower than 75 dB, leave the subwoofer’s volume control at its maximum and press ENTER to proceed to the next step.

5 Use q/wto select “Audyssey Quick Start” or “Audyssey MultEQ XT Full Calibration”.

6 Press ENTER.

Audyssey MultEQ® XT Room Correction and Speaker Setup starts.

Test tones are played through each speaker as Audyssey MultEQ XT Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone. Do not disconnect the speaker setup microphone during Audyssey MultEQ XT Room Correction and Speaker Setup, unless you want to cancel the setup. If you select “Audyssey Quick Start”, you will go to step 9.

7 Place the setup microphone at the next position, and then press ENTER.

Audyssey MultEQ XT performs more measurements. This takes a few minutes.

8 When prompted, repeat step 7.

9 Use q/wto select an option, and then press

ENTER.

MultEQ XT: Auto Setup

 

 

 

 

AUDYSSEY

-- Review Speaker Configuration --

Subwoofer

:

Yes

Front

:

100Hz

Center

:

40Hz

Surround

:

100Hz

Front Wide

:

None

Front High

:

None

Surround Back

:

120Hz

Surround Back Ch

:

2ch

Save

 

 

Cancel

 

 

The options are:

`Save:

Save the calculated settings and exit

Audyssey MultEQ XT Room Correction and

Speaker Setup.

`Cancel:

Cancel Audyssey MultEQ XT Room Correction

and Speaker Setup.

Note

•You can view the calculated settings for the speaker configuration, speaker distances, and speaker levels by using e/r.

10 Use q/wto select a target, and use e/rto change the setting.

After the results of Audyssey MultEQ XT have been saved, the menu will display the “Audyssey”

(➔ page 51), “Dynamic EQ” (➔ page 51), “Dynamic Volume” (➔ page 52) settings.

Note

•When “Audyssey Quick Start” has been used for measurement, “Audyssey” cannot be selected.

•These settings are applied to all input selectors.

11 Press ENTER.

12 Disconnect the speaker setup microphone.

Note

•You can cancel Audyssey MultEQ XT Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone.

•Do not connect or disconnect any speakers during Audyssey MultEQ XT Room Correction and Speaker Setup.

•If the AV receiver is muted, it will be unmuted automatically when Audyssey MultEQ XT Room Correction and Speaker Setup starts.

•Changes to the room after Audyssey MultEQ XT Room Correction and Speaker Setup requires you run Audyssey MultEQ XT Room Correction and Speaker Setup again, as room EQ characteristics may have changed.

En

32

Page 31 Page 33
Page 32
Image 32
Onkyo HT-RC370 When you’ve finished making the settings, press, Adjust the subwoofer volume level to 75 dB, ` Save
Page 31 Page 33

HT-RC370 specifications

The Onkyo HT-RC370 is a versatile and feature-rich AV receiver designed to enhance the home theater experience. Launched as a part of Onkyo’s acclaimed lineup, this receiver provides high-quality audio and video processing capabilities to satisfy both casual viewers and audiophiles alike.

One of the main features of the HT-RC370 is its support for both 7.2 channel surround sound and multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio. This ensures immersive soundscapes for movies, music, and games, delivering a cinema-like experience right at home. The receiver offers a potent 100 watts per channel, which guarantees powerful sound output, making it suitable for various room sizes.

The HT-RC370 takes advantage of Onkyo’s advanced audio processing technologies, such as Audyssey MultEQ room correction. This system analyzes the acoustics of the space and automatically adjusts the speakers for optimal sound performance, significantly improving overall sound quality. Additionally, the receiver supports two subwoofers, enhancing low-frequency performance and creating a more balanced sound stage.

In terms of connectivity, the Onkyo HT-RC370 features an extensive range of options. It includes multiple HDMI inputs and outputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all while supporting 3D video and 4K upscaling capabilities. Other connectivity options include analog and digital audio inputs, as well as components like USB ports for easy access to music files.

An intuitive GUI (Graphical User Interface) enhances usability, and it provides straightforward control for both audio and video settings. The receiver also includes built-in network capabilities for streaming music from various online sources, such as Spotify and Pandora, providing flexibility for music lovers.

In summary, the Onkyo HT-RC370 combines robust features, advanced audio technologies, and extensive connectivity options to create an exemplary audio-visual experience. Whether you are hosting movie nights or enjoying your favorite music, this receiver provides the power, performance, and flexibility needed to elevate any entertainment setting.
Top Page Image Contents