Onkyo HT-RC370 Connecting the AV Receiver, Connecting Your Speakers, Screw-typespeaker terminals

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.

Front high	Front wide			Front wide	Front high
right	right	Front right	Front left	left	left	Center

Surround	Surround	Surround	Surround
right	back right	back left	left

■Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

■Banana Plugs (North American models)

1/2" to 5/8" (12 to 15 mm)

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

En

12