![](/images/backgrounds/21948/21948-5227x1.png)
Recording (continued)
MINIDISC RECORDER
| MULTI JOG |
| EDIT/ NO YES |
DISC LOADIING MECHANISM | |
| CD |
INPUT | REC MODE DUBBING REC PUSH TO ENTER |
STANDBY / ON |
|
STANDBY/ON |
|
STANDBY |
|
DISPLAY |
|
| |
INPUT | REC MODE |
In digital recording, an optical digital cable is used to input signals from the recording source.
About digital recordingThe
1 Press the STANDBY/ON button.
The STANDBY indicator goes out.
STANDBY / ON
STANDBY
2 Load a recordable MD.
Refer to Step 2 on page 24.
3 Press the INPUT button repeatedly until “Digital In 1” or “Digital In 2” appears.
Digital input source 1 or 2 is now selected.
INPUT
DIGITAL IN 1
or
DIGITAL IN 1 2
Note
•Make sure the supplied optical cable is connected to the correct digital input terminal. If you attempt to perform digital recording using a digital input terminal that is not connected, “D.In Unlock” will appear.
•Use the DIGITAL INPUT 1 digital input terminal if you connect the
Operations
4 Select a recording mode.
Refer to Step 4 on page 22.
5 Play the recording source.
If the
(Continued on the next page)
27