Editing the contents of an MD (continued)

5 Divide the track.

Press the MULTI JOG knob to divide the track.

If a track with a name is divided into two parts, the former part takes over the name and the latter part is left without a name. When the dividing of the track is complete, “Complete” appears on the

MULTI JOG

TOC

Combining tracks (Combine function)

•The Combine function enables you to combine two adjacent tracks into one. You cannot, however, combine a digital track and an analog track. You cannot combine two tracks that were recorded in different recording modes, either. For example, you cannot combine a track recorded in MONO mode and a track recorded in LP2 mode.

•This function is available while the recorder is stopped, paused, or playing.

1Turn the MULTI JOG knob to select the number of a track to be combined with the previous track.

MULTI JOG

 

Lights when completed

 

 

 

Dividing a track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

2

 

 

3

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

3

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Updating the track numbers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

2

 

 

3

 

4

 

5

display.

Tip:

• The numbers of the tracks following the

divided track will be increased by one.

(For example, if you divide track 2 into

two, the latter part of the track will

become as track 3. Track 3 will be

•The selected track will be combined with the previous track.

•If both of the combined tracks have names, the previous track’s name will be used for the new track.

•If only the previous track has a name, the name will be used for the new track.

•If only the latter track has a name, the new track will not have a name.

2 Press the EDIT/NO button and turn the MULTI JOG knob to select “Combine ?”

Operations

renumbered as Track 4, Track 4 will be

renumbered as Track 5, and so on.)

• To erase parts of a track, first divide the

track in parts, then erase the parts.

(Refer to pages 52 and 53 for more

information on erasing the tracks.)

EDIT/ NO

TRACK

MULTI JOG

Note:

While the TOC indicator is lit or flashing, do not move or unplug the MD recorder.

SP

To cancel the Combine operation...

Press the EDIT/NO button or the button.

(Continued on the next page) 37