HT-S590_En.book Page 56 Wednesday, February 1, 2006 4:26 PM

Troubleshooting—Continued

•On the AV receiver, the subwoofer setting in the speaker configuration is set to No. Set the subwoofer setting to Yes.

There’s no sound with a certain signal format?

•Check the digital audio output setting on the con- nected device. On some games consoles, such as those that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an audio output format from a menu.

Can’t get 5.1-channel playback?

•When speaker B is turned on, speaker set A is reduced to 2.1-channel playback.

The volume cannot be set to 79?

•When the subwoofer volume level is set to a positive

(+) value, the maximum master volume level is reduced proportionally.

Noise can be heard?

•Using cable ties to bundle audio cables with power cords, speaker cables, and so on may degrade the audio performance, so don’t do it.

•An audio cable may be picking up interference. Try repositioning your cables.

The Late Night function doesn’t work?

•Make sure the source material is Dolby Digital (page 49).

The DVD analog multichannel input doesn’t work?

•Check the DVD analog multichannel input connec- tions (page 27).

•To select the DVD analog multichannel input, press the [MULTI CH] input selector button (page 37).

•Check the audio output settings on your DVD player.

About DTS signals

•When DTS program material ends and the DTS bit- stream stops, the AV receiver remains in DTS listening mode and the DTS indicator remains on. This is to pre- vent noise when you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, because the AV receiver does not switch formats immediately, you may not hear any sound, in which case you should stop your player for about three seconds, and then resume playback.

•With some CD players, you won’t be able to playback DTS material properly even though your player is con- nected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn’t recog- nize it as a genuine DTS signal. In such cases, you may hear noise.

•When playing DTS program material, using the pause, fast forward, or fast reverse function on your player may produce a short audible noise. This is not a mal- function.

Video

There’s no picture?

•Make sure that all video connecting plugs are pushed in all the way (page 24).

•Make sure that each video component is properly con- nected.

•The AV receiver does not convert between formats, so if a video source component is connected to a compo- nent video input, your TV must be connected to the component video output (page 25).

•On your TV, make sure that the video input to which the AV receiver is connected is selected.

Tuner

Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesn’t appear?

•Relocate your antenna.

•Move the AV receiver away from your TV or com- puter.

•Listen to the station in mono (page 38).

•When listening to an AM station, operating the remote controller may cause noise.

•Passing cars and airplanes can cause interference.

•Concrete walls weaken radio signals.

•If nothing improves the reception, install an outdoor antenna (page 23).

Remote Controller

The remote controller doesn’t work?

•Make sure that the batteries are installed with the cor- rect polarity (page 7).

•Make sure that the remote controller is not too far away from the AV receiver, and that there’s no obstruction between the remote controller and the AV receiver’s remote control sensor (page 7).

•Make sure you’ve selected the correct remote control- ler mode (page 12).

•Make sure you’ve entered the correct remote control code.

Can’t control other components?

•Make sure you’ve selected the correct remote control- ler mode (page 12).

•If you’ve connected an -capable Onkyo MD recorder, CD recorder, or next generation HDD-com- patible component to the TAPE IN/OUT jacks, or a DS-A1 Remote Interactive Dock to the VIDEO 3 IN jacks, for the remote controller to work properly, you must set the Input Display to MD, CDR, or HDD (see page 35).

•To control an Onkyo component that’s connected via

, point the remote controller at the AV receiver.

56

Page 55 Page 57
Page 56
Image 56
Onkyo SKC-340C, SKF-340F, SKM-340S, SKW-340 instruction manual Troubleshooting
Page 55 Page 57

SKW-340, SKM-340S, SKF-340F, SKC-340C specifications

The Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F are a cohesive speaker system designed for home theater enthusiasts and audiophiles looking for a complete surround sound experience. Each component of this set is engineered to deliver impressive audio performance, making it well-regarded in the realm of consumer electronics.

Starting with the SKC-340C, which serves as the center channel speaker, its primary role is to anchor dialogue and provide clarity in movies and music. Featuring a dual 5.25-inch woofers and a 1-inch tweeter, it is designed to enhance vocal frequencies, delivering clear dialogue and nuanced sound effects. The speaker is tuned to blend seamlessly with the other components in the system, ensuring that sound flows naturally across all channels.

Next is the SKM-340S, the surround speaker in the system. Compact yet powerful, it employs a 5.25-inch woofer combined with a pivoting 1-inch tweeter. This design allows for a broader soundstage while maintaining precise directionality of sound, an important aspect for immersive surround sound scenarios. The SKM-340S is designed to accommodate various mounting options, whether on walls or shelves, enhancing flexibility in home setup.

The SKW-340 subwoofer rounds out the system by providing deep, powerful bass response essential for a fulfilling home theater experience. Equipped with a 10-inch driver in a front-firing configuration, the SKW-340 is engineered to deliver rich low-frequency sounds without distortion. It sports a built-in amplifier that handles peak power with ease, ensuring your audio experience remains consistent even during the most dynamic scenes.

Completing the lineup is the SKF-340F, a pair of floor-standing speakers that bring both style and performance into the equation. With dual 5.25-inch woofers and a 1-inch tweeter, they provide a full-range audio experience suitable for music and movie playback. The design of the SKF-340F incorporates acoustic enhancements such as a bass-reflex port that optimizes airflow, resulting in enhanced bass response that does not overpower mid and high frequencies.

Overall, the Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F combine to create a comprehensive audio experience that captures the essence of sound both in passive listening and active viewing. Their engineering prioritizes precision and clarity, ensuring that whether you're gaming, binge-watching, or enjoying music, your auditory experience is both robust and enjoyable. Together, they stand as a testament to Onkyo's commitment to quality audio design, making this system a worthwhile investment for those serious about their sound.
Top Page Image Contents