Onkyo TX-DS696 appendix OSD Setup menu, Setup menus, OSD Setup sub-menu, OSD Position sub-menu

Setup menus

5. OSD Setup menu

This menu provides settings for you to customize the on-screen display (OSD) for the TX-DS696 by setting different colors or positions for its display.

Menu

1.Speaker Setup

5.OSD Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

1.OSD Setup

5.OSD Setup

2.OSD Position

3.OSD Config

ENTER Quit:OSD

ENTERQuit:SETUP

Menu

1.Speaker Setup

5.OSD Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

51-.1OSD.OSDConfigSetup

5.OSD Setup

2.OSD Setup

3.OSD Position

a.Background Color

:Blue1

b.Superimpose Mode

ENTER Quit:OSD

:Normal

c.Immediate Display

ENTER Quit:OSD:On

d.Display Position

:Bottom

Quit:SETUP

Menu

1.Speaker Setup

5.OSD Setup

2.Input Setup

3.Listening Mode Setup

4.Preference

51-.2OSD.OSDConfigPosition

5.OSD Setup

2.OSD Setup

3.OSD Position

ENTER Quit:OSD

ENTER Quit:OSD

Quit:SETUP

Menu
1.Speaker Setup
5.OSD Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
51-.3OSD.OSDConfig
5.OSD Setup
2.OSD Setup
3.OSD Position
a.TV Format	:Auto
ENTER Quit:OSD
ENTER Quit:OSD
Quit:SETUP

5-1. OSD Setup sub-menu

This sub-menu allows you to customize the OSD Setup menu to display in the manner you desire.

a. Background Color

Select either Blue1, Blue2, Green1, Green2, Magenta, Red1, or Red2 as the background color while the OSD Setup menu is displayed.

b. Superimpose

Off: Select to have the OSD Setup menu displayed on the selected background color.

Normal: Select to have the OSD Setup menu superimposed over the current video if one is displayed or on the selected background color if there is no video signal.

Black: Select to have the OSD Setup menu displayed on a black background at all times.

VIDEO 1

c. Immediate Display

On: Select this to have the screen immediately display certain operations as you perform them. The display will remain for a few seconds after the operation is completed.

Off: Select this to turn off the immediate display of operations.

Hint:

If this is set to “Off,” the background color will not be displayed even when there is no video signal input.

d. Display Position

Use this setting to select the position of the immediate display that appears when certain operations are performed. You can position the immediate display at any of ten different levels ranging from the top all the way to the bottom.

5-2. OSD Position sub-menu

This sub-menu allows you to adjust the position of the OSD Setup menu as it is displayed on your screen. Depending on the monitor used, there may be cases where the OSD Setup menu is not displayed in the center and parts of the menus are cut off. To adjust the position of the OSD Setup menu, simply press the cursor buttons to inch the menu to position you desire.

5-3. OSD Config sub-menu

a. TV format

(For all models other than USA and Canadian models)

The default setting is “Auto,” which means that the television format is detected and automatically set by the TX-DS696. However, if you know the correct format, you can use this setting to choose either PAL or NTSC so that no time is wasted on detection.

43