Rear panel facilities

REMOTE CONTROL

The terminal on the TX-DS797 is for connecting other Onkyo

components equipped with the same terminal. When a

component is -connected, you can point the remote controller supplied with the TX-DS797 at the sensor on the TX-DS797 and operate that component without having to switch remote controllers.

In addition, by connecting components to the terminal, you can also perform the system operations given below.

Power on/ready function

When the TX-DS797 is in the standby state, if an -connected component is turned on, then the TX-DS797 also turns on and the input source selected at the TX-DS797 automatically switches to that component.

If the power cord for an -connected component is connected to the AC OUTLET on the TX-DS797, or if the TX-DS797 is turned on, this function will not work.

Direct change function

When the play button is pressed at an -connected component, the input source selected at the TX-DS797 automatically changes to that component.

Power off function

When the TX-DS797 is placed in the standby state, all - connected components are also automatically put into the standby state.

CAUTION

If an MD recorder is connected to the TAPE jack on the TX-DS797, switch the Input Selector from TAPE to MD (see page 23).

TX-DS797

connector

Ex: Onkyo CD player

connector

Ex: Onkyo cassette tape deck

To connect components using the terminal, simply connect a

IR IN/OUT

If the TX-DS797 is located inside a rack or cabinet that will not allow infrared beams to reach the IR sensor, you will need to connect a remote sensor to IR IN input to be able to use the remote controller. Then install the remote sensor in an unblocked location where you can easily point the remote controller.

Using a mini-jack connector, connect the IR emitter to the IR OUT terminal on the TX-DS797 and then place the IR emitter on the remote sensor of the component or facing it.

VIDEO IN/OUT

These are the video inputs and outputs. On the rear panel, there are five video inputs and two video outputs and each one includes both composite video and S video configurations. Connect VCRs, LD players, DVD players, and other video components to the video inputs.

The two video output channels can be used to be connected to video tape recorders for making recordings.

When connecting a VCR or other video component, make sure you connect the audio and video leads together (i.e., both to VIDEO 3).

The VIDEO 5 inputs are located on the front panel.

Composite video jack

S video jack

MULTI CHANNEL INPUT

By connecting a DVD player, MPEG decoder, or other component that has a multi channel port, you can playback the audio with 5.1- channel or 7.1-channel output. So be sure to prepare a cable that can properly connect the TX-DS797 to the peripheral device. The signal input from SURR BACK R is output to the SURR BACK SPEAKER terminal.

L (white)

Front output

R (red)

DIGITAL

PRE OUT

OUTPUT

R

L

 

 

FRONT

 

Subwoofer

OPT

 

 

 

 

 

 

 

SUB

CENTER

 

 

 

 

DIGITAL

 

 

 

INPUT

 

 

remote control cable from this terminal to the terminal of the

other component. An remote control cable with a 1/8-inch (3.5-

mm)miniature two-conductor plug comes with every cassette tape deck, compact disc player, MD recorder, and DVD player that has an terminal.

When performing operations with

-connected components

 

using the

system, do not use the remote zone (Zone 2).

• For remote control operation, the audio connection cables must

 

also be connected.

 

 

If a component has two

terminals, you can use either one to

 

connect to the TX-DS797. The other one can be used to daisy

 

chain with another component.

 

• With Onkyo DVD players, you can enter the pre-program code

 

so that you can operate the DVD player directly with the remote

L (white)

Surround

R (red)

Ex: DVD-Audio player/

MPEG decoder

R (red)

Surround back

L (white)

Center

COAX

SURR

1

 

 

SURR

 

BACK

2

 

3

FRONT

 

OPT

SUB

1

 

SURR

2

SURR

BACK

3

R

DIGITAL

INPUT

GND

MULTI C INPUT

CENTER

L

controller without connecting the

terminals (see page 61).

GND

Use this GND terminal for connecting the ground (or earth) wire if a turntable is connected. Refer to “Connecting a turntable” on page 15.

14

Page 14
Image 14
Onkyo TX-DS797 instruction manual Remote Control, Ir In/Out, Video IN/OUT, Multi Channel Input, Gnd

TX-DS797 specifications

The Onkyo TX-DS797 is an iconic AV receiver that has left a lasting impression on home theater enthusiasts since its release. Known for its robust performance and extensive feature set, this receiver is designed to deliver an immersive audio-visual experience that can elevate any entertainment setup.

One of the standout features of the TX-DS797 is its impressive multi-channel amplification system. With a power output of 100 watts per channel, the receiver can drive a wide range of speakers, providing dynamic sound that fills the room. This power is complemented by Onkyo’s Wide Range Amplification Technology, which ensures clear and accurate sound reproduction across various frequencies. The receiver supports Dolby Digital, DTS, and THX audio formats, making it suitable for both movies and music.

The TX-DS797 is equipped with multiple inputs and outputs, allowing for extensive connectivity options. It includes six composite video inputs, three S-video inputs, and two component video inputs, making it easy to connect various devices such as DVD players, gaming consoles, and satellite receivers. Additionally, the receiver features a built-in AM/FM tuner and supports recording outputs, giving users the flexibility to manage their media.

In terms of audio processing, the TX-DS797 boasts a 24-bit/192 kHz DAC, ensuring high-fidelity audio playback. The receiver also supports various audio codecs, providing users with a diverse listening experience that caters to different preferences. The inclusion of the Onkyo’s proprietary DSP (Digital Signal Processing) allows for accurate simulation of different sound environments, enhancing the immersion during movie watching and music listening.

Furthermore, the TX-DS797 is designed with user convenience in mind. Its intuitive on-screen display makes navigation through various settings and configurations a straightforward process. It also comes with a remote control, allowing users to manage their audio-visual setups from the comfort of their couch.

With a sleek and modern design, the Onkyo TX-DS797 not only performs well but also adds an aesthetic appeal to any home theater environment. It offers an excellent balance of power, versatility, and advanced technology, making it an enduring choice for audiophiles and casual listeners alike. Whether you are watching a blockbuster film or listening to your favorite music, the TX-DS797 delivers an exceptional performance that is hard to beat.