Onkyo TX-DS797 Listening to RDS broadcasts, Displaying Radio Text RT, Performing a TP scan

Listening to RDS broadcasts

PRESET

/

RT/PTY/TP

ENTER

DISPLAY

RT/PTY/TP

REC OUT

ZONE 2

OFF

MASTER VOLUME

STANDBY/ON

SETUP

TUNING

ENTER

STANDBY

POWER

RETURN

PRESET

ON OFF

DIRECT

STEREO

SURROUND

THX

DSP

FM MODE

MEMORY

A-FORM LISTENING MODE MEMORY

UPSAMPLING

CLEAR

PHONES

ZONE 2 (GRN )

VIDEO 5/VIDEO CAM INPUT

AUDIO

REC ( RED )

DVD

VIDEO 1

VIDEO 2

VIDEO 3

VIDEO 4

VIDEO 5

TAPE

FM

AM

PHONO

C D

SELECTOR

VCR 1

VCR 2

DIGITAL

S VIDEO

VIDEO

L AUDIO R

AV RECEIVER TX-DS797

FM

Displaying Radio Text (RT)

If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the TX-DS797. If the

station does not, this function will be ignored. RT/PTY/TR

1. To display the radio text, press the RT/PTY/TP button once.

•If the current station you are listening to is not an RDS station, only the frequency of the station appears.

•If “Waiting” appears on the display, more time is required to receive the RT information. When the information is received, the characters will scroll across the front display.

•If “No Text Data” appears on the display, RT information is not available.

•The display shows the frequency for 3 seconds and returns to program service name.

4. Press the ENTER button. ENTER

The TX-DS797 will scan until it reaches a station of the program type you selected. It will then stop briefly at that station before continuing on until it reaches the next station. Pressing the ENTER button stops the PTY scan at that point. If you press the RT/PTY/TP while “NONE” is displayed, “PTY ?” will appear. In this case, return to step 3.

5. Press the ENTER button when it	ENTER
reaches the station that you want to
listen to.

“Not Found” will appear when no RDS signal is being received from the station.

Performing a TP scan

1. Press the FM input source button. FM

Performing a PTY scan

1.	Press the FM input source button.	FM
2.	Press the RT/PTY/TP button twice.	RT/PTY/TR

The current program type appears on the display.

3. Using the / buttons, select the

PTY program type you desire.

PRESET

2. Press the RT/PTY/TP button three	RT/PTY/TR
times.

“[TP]” will appear if the current station is broadcasting TP signals. This station will periodically broadcast traffic information. To find a different station, proceed to the next step. Also, if “TP” is displayed, proceed to the next step.

3. Press the ENTER button. ENTER

The TX-DS797 will scan until it reaches a station broadcasting traffic information. If “Not Found” appears on the display, a TP station cannot be located.

49