Onkyo TX-DS797 instruction manual Speaker Setup menu, Speaker Config sub-menu

Speaker Setup

1. Speaker Setup menu

After you have installed the TX-DS797, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you first determine the following characteristics:

•The types and sizes of the speakers that are connected.

•The distance from each speaker to your normal listening position.

1-1. Speaker Config sub-menu

Here you will enter which speakers are connected and the size of each speaker.

Advanced Menu

1.Speaker Setup

1-.1Speaker.ConfigConfig 2.Speaker Distance 3.Level Calibration 4a..BassSubwooferPeak Level:Yes

(Only one surround back speaker)

Advanced Menu

1.Speaker Setup

1.Speaker Config 2.Speaker Distance 3.Level Calibration 4.Bass Peak Level

(Two surround back speakers)

Basic Menu

1.Speaker Setup

1.Speaker Config 2.Speaker Distance 3.Level Calibration

b.Front	:Small
c.Center	:Small
d.Surr L/R	:Small
e.Surr Back	:Small

f.SurrENTERBack OQuit:1chOSD

Quit:SETUP

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

ENTERQuit:SETUP ENTERQuit:SETUP

Memo:
(Only one surround back						(Two surround back speakers)
speaker)
			Monitor						Monitor
Front		SW Center			Front	Front		SW Center			Front
	[	]	[	]m/ft			[	]	[	]m/ft
		m/ft						m/ft
[	]m/ft			[	]m/ft	[	]m/ft			[	]m/ft
SL					SR	SL					SR
[		]m/ft		[	]m/ft	[		]m/ft		[	]m/ft
						[	]m/ft			[	]m/ft
			SB [		]m/ft			SBL		SBR

Tip:

When setting the speaker size in the Speaker Config sub-menu, use the guidelines given below.

Large: The complete frequency range for the channel you are setting will be output from the speaker.

Small: Frequencies of the channel you are setting lower than 80 Hz will be output from the subwoofer. If there is no subwoofer, then the output will be from the left and right front speakers. (Set all speakers for THX speaker systems to “small.”)

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

•If “No” is selected for the Subwoofer setting, then this setting is fixed to “Large.”

c.Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

d.Surround L/R

None: Select if no surround left and right speakers are connected.

Large: Select if the surround left and right speakers are large sized.

Small: Select if the surround left and right speakers are small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

e.Surround Bk

None: Select if no surround back left and right speakers are connected.

Large: Select if the surround back left and right speakers are large sized.

Small: Select if the surround back left and right speakers are small sized.

•If “None” is selected for the Surround L/R setting, the display disappears from the screen.

•If “Small” is selected for the Surround L/R setting, then “Large” cannot be selected for this setting.

f.Surr Back Out

1ch: Select if there is only one surround back speaker.

2ch (PREOUT only): Select if there are two surround back speakers. (For preout output only.)

29