Onkyo TX-DS797 instruction manual Setup menus, Basic Menu, Advanced Menu

Setup menus

When making the various settings required to configure your TX-DS797 optimally, you can either use the OSD menu that appears on your television monitor or you can use the display on the front of the TX-DS797. The OSD menu is a settings menu that is displayed on your TV monitor. For use as reference when performing the setting procedures, this manual shows both the OSD menu displayed on your television monitor and the display on the front of the TX-DS797.

The Setup menu consists of a main screen that is divided up into 5 menus: Hardware Setup, Speaker Setup, Input Setup, Audio Adjust, and Preference. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish.

			0.Hardware Setup			0.Hardware Setup
				1.Speaker Impedance			1.Speaker Impedance
							2.IR IN Setup
							3.AM Frequency Setup
				ENTERQuit:SETUP				ENTERQuit:SETUP
Basic Menu
Your TX-DS797 is provided with a
			1.Speaker Setup			1.Speaker Setup
Basic Setup Menu for those who are
not familiar with		many of the		1.Speaker Config			1.Speaker Config
advanced settings of an AV receiver
				2.Speaker Distance			2.Speaker Distance
or those who wish to watch movies				3.Level Calibration			3.Level Calibration
and listen to music with the minimal							4.Bass Peak Level
amount of setup. With the Basic
Setup Menu, the settings that rarely					ENTERQuit:SETUP			ENTERQuit:SETUP
need to be set or that are not needed
for a reasonably good degree of
sound quality are		not displayed.
			2.Input Setup			2.Input Setup
Settings listed with		next to their
					Input:DVD			Input:DVD
name are settings that can be set				1.Digital Setup			1.Digital Setup
using the Basic Setup Menu.				2.Multichannel Setup			2.Multichannel Setup
				3.Video Setup			3.Video Setup
				4.Character Input			4.Character Input
	Basic Menu			5.Intelli Volume			5.Intelli Volume
							6.Listening Mode Preset

0.Hardware Setup
1.Speaker Setup	ENTERQuit:SETUP	ENTERQuit:SETUP
2.Input Setup
3.Audio Adjust
→Advanced Menu	3.Audio Adjust	3.Audio Adjust
ENTERQuit:SETUP	1.Tone Control	1.Tone Control
		2.Surround Speakers
	2.Surround Speakers	3.Sound Effect
Note:		4.Delay
	3.Sound Effect	5.LFE Level
Once you set the Speaker Impedance setting at the
	→default	6.Mono Setup
Hardware Setup menu, the setting will not be		7.Theater Dimensional
		8.Surround Setup
displayed again when you enter the Basic Menu.
Advanced Menu		3.Audio Adjust
The Advanced Menu provides an
Advanced Setup Menu with features		9.THX Setup
such as the Listening Mode Presets that		10.Mono Movie Setup
allow you to customize the output sound		11.Enhanced 7 Setup
		12.Orchestra Setup
for movies and music just the way you		13.Unplugged Setup
		14.Studio Mix Setup
like and the AV Sync Setup that allows
		15.TV Logic Setup
you to adjust for discrepancies between		→default
the video and audio timing.
Advanced Menu		4.Preference
0.Hardware Setup
1.Speaker Setup		1.Volume Setup
2.Input Setup
3.Audio Adjust		2.Headphone Level Setup
4.Preference		3.OSD Setup
→Basic Menu
		4.OSD Position
ENTERQuit:SETUP		ENTERQuit:SETUP

26