CONFIGURATION AND MANAGEMENT

Resetting the Switch

Reset

Display Diagnostics While Power-On

Reset Unit with Diagnostics

Reset Unit without Diagnostics

Clear Address Table

Reset EEprom to Factory Default Value

Use cursor keys to choose item. Press <ENTER> to confirm choice.

Press <CTRL><N> to return to the Main Menu.

Figure 4-15. Reset Screen

This screen provides the following options:

1.Highlight “Reset” in the Main Menu and press <ENTER> to access the reset screen (Figure 4-14).

2.Highlight “Display Diagnostics While Power-On and press <ENTER> to enable/disable diagnostic indicators during a reset.

3.Highlight “Reset Unit with Diagnostics” or “Reset Unit without Diagnostics” and press <ENTER> to enable or disable diagnostic tests, respectively, during a reset.

4.Highlight “Clear Address Table” and press <ENTER> to clear the address table of a single port or the whole switch. Use arrow keys to cycle through selections (Ports 1-8 or the whole switch). Press <ENTER> to confirm the choice.

5.Highlight “Reset EEprom to Factory Default Value” and press <ENTER> to clear all counters and restore factory default settings for all configuration parameters. The system will ask for confirmation. Press <ENTER> to confirm and initiate.

4-30

Page 81
Image 81
SMC Networks SMC6608T, SMC6608M manual Resetting the Switch