CONFIGURATION AND MANAGEMENT
System Parameter Configuration
1.Highlight “System Configuration” in the Main Menu and press <ENTER>. This will access the System Configuration Screen (See below).
|
| System Configuration |
System Name | SMC TigerSwitch 100 | |
System Location | MIS | |
System Contact | SMC Technical Support Dept. | |
|
| 192.72.24.31 |
|
| |
Default Gateway | 192.72.24.202 | |
Subnet Mask | 255.255.255.0 | |
IP State | BootP When Needed | |
Send Ping |
| |
Return to Previous Menu
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to Main Menu
Figure 4-5. System Configuration Screen
2.Highlight “System Name” and press <ENTER> to assign a name to identify the switch if the default entry (see above) is not suitable. Press <ENTER> again to confirm entry.
3.Highlight “System Location” and press <ENTER> to input the physical location of the switch. Press <ENTER> again to confirm entry.
4.Highlight “System Contact” and press <ENTER> to specify the party to contact in the event of a switch malfunction. Press <ENTER> again to confirm entry.
5.Highlight “IP Address” and press <ENTER> to assign an IP address to the switch. Press <ENTER> again to confirm entry.
