GLOSSARY

10BASE-T

IEEE specification for 10 Mbps Ethernet on two pairs of Category 3, 4 or 5 twisted-pair cable. The point-to-point cable segment can be up to 100 m (328 ft.) in length.

100BASE-FX

IEEE specifications for 100 Mbps Fast Ethernet on multimode fiber optic cable. The maximum length for a point-to-point connection is 2 km (1.24 mi.) in full-duplex mode, or 412 m (0.25 mi.) in half-duplex mode.

100BASE-TX

IEEE specifications for 100 Mbps Fast Ethernet on two pairs of Category 5 twisted-pair cable. The point-to-point cable segment can be up to 100 m (328 ft.) in length.

ANSI/IEEE 802.3 Standard

Standard developed by the ANSI/IEEE (American National Standards Institute/Institute of Electrical and Electronics Engineers) for the physical and electrical connections in Ethernet local area networks.

ANSI/IEEE 802.3u Standard

Standard developed by the ANSI/IEEE (American National Standards Institute/Institute of Electrical and Electronics Engineers) for the physical and electrical connections in Fast Ethernet local area networks.

BOOTP

Boot protocol used to load the operating system for devices connected to the network.

D-2

Page 109
Image 109
SMC Networks SMC6608T, SMC6608M manual ANSI/IEEE 802.3 Standard, ANSI/IEEE 802.3u Standard