SMC Networks SMC6608T, SMC6608M manual Port Status

CONFIGURATION AND MANAGEMENT

Port Status

This screen displays the current status of each port on the switch.

Port Status

Port MediaType Enabled Link Speed Duplex AgTime SwhMode FlowCntl

1	TX	Yes	Up		10M	Half	300	A-CT	Yes
2	TX	Yes	Down		---	---	---	---	---
3	TX	Yes	Up		10M	Full	300	CT	No
4	TX	Yes	Up		100M	Half	300	A-CT	Yes
5	FX	Yes	Up		100M	Half	300	A-CT	Yes
6	FX	Yes	Up		100M	Full	300	CT	No
7	TX	Yes	Up		100M	Half	300	FgFree	Yes
					8	TX	Yes	Up	10M
				Half300		S&F	Yes

Figure 4-10. Port Status Screen

	Port Status Screen Items
Parameter	Description
Media Type	Displays Port type (100BASE-FX, etc.)
Enabled	Shows whether the port is enabled
Link	Indicates whether a device is attached to the port
	and is transmitting a link pulse signal
Speed	Indicates at what speed port is operating
Duplex	Indicates whether the port is running in full- or
	half-duplex mode
AgTime	Time (in sec.) after which unused addresses will
	be discarded from address table
SwhMode	Shows the method chosen for data packet
	forwarding (i.e., cut-through, fragment-free, etc.)
FlowCntl	Shows whether Flow Control is enabled

4-22