MANAGEMENT VIA SNMP
SNMP Parameter Configuration
In order to access the SNMP agent resident in the TigerSwitch 100 units, the switch must be configured with a valid IP address, default gateway and subnet mask. This is accomplished through the System Configuration Program, which can be accessed
Assigning SNMP Agent Access Rights
1.Highlight “SNMP Configuration” in the System Configuration Program Main Menu (See Chapter 4) and press <ENTER>. This will access the SNMP Configuration screen (See below).
|
| SNMP Configuration | |
Send | Authentication Traps | Yes | |
Community Strings.... |
| ||
Trap | Receivers.... |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to the Main Menu.
Figure 5-1. SNMP Configuration Screen
2.Highlight “Send Authentication Traps” and press <ENTER> to enable the SNMP agent to issue a trap message to specified stations (Trap Receivers) in the event that it receives a request containing an invalid community string. To define valid community strings, proceed with Step 3. Otherwise, skip to Step 5.
