CONFIGURATION AND MANAGEMENT
Port Configuration
1.Highlight “Port Configuration” in the Main Menu and press <ENTER>. This will access the Port Configuration Screen illustrated below.
Port Configuration
Port | Enabled | Duplex | AgingTime | SwitchingMode | FlowControl | ||
1 | Yes |
| Auto | 300 | CT | Yes | |
2 | Yes |
| Auto | 300 | CT | Yes | |
3 | Yes |
| Auto | 300 | CT | Yes | |
4 | Yes |
| Auto | 300 | CT | Yes | |
5 | Yes |
| Half | 300 | CT | Yes | |
6 | Yes |
|
|
| 300 | CT | Yes |
|
|
| |||||
7 | Yes |
| Auto | 300 | CT | Yes | |
8 | Yes |
| Auto | 300 | CT | Yes | |
Return to Previous Menu
Selecting Half or Full Duplex? 
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to the Main Menu
Figure 4-6. Port Configuration Screen
2.Highlight the setting under the “Enabled” column for the chosen port and press <ENTER> to use the arrow keys to toggle between enabling and disabling the port. Press <ENTER> again to confirm the choice.
3.Highlight the setting under the “Duplex” column to adjust the communication mode for the chosen port. Press <ENTER> to use the arrow keys to cycle through Full- duplex,
4.Highlight the setting under the “AgingTime” column to adjust Address Aging for the chosen port. Address Aging is the amount of time addresses will remain in the address table before being deleted. Press <ENTER> to input a value between 0 and 43200 seconds. Press <ENTER> again to confirm the chosen value.
