HP 640n Print Server manual Troubleshooting, HP Jetdirect Configuration, LEDs

4 Troubleshooting

This section contains information on the following topics:

●HP Jetdirect Configuration Page

●LEDs

●Resetting to Factory Defaults

●Controlling Network Protocols

HP Jetdirect Configuration Page

The HP Jetdirect Configuration page provides comprehensive print server status. It is an important diagnostic tool, especially if network communications with the print server is not available.

In most HP LaserJet printers/MFPs, an HP Jetdirect Configuration page will automatically print when you print a Printer Configuration page. Refer to your printer/MFP documentation for instructions to print configuration pages.

For a description of messages that may appear on the HP Jetdirect Configuration Page, see the HP Jetdirect Print Servers Administrator’s Guide for your print server model.

LEDs

The HP Jetdirect 695n Print Server contains the following status lights (LEDs) that indicate the wireless status, the network connection speed, link status, and network activity.

Table 4-1HP Jetdirect LEDs

LED	Color	Description
Wireless	Blue	Slow Blink — Scanning (blink is approximately once per second).
Connection Status		Blinking — Connected to network (rate depends on data rate).
		Constant — No data transfer.
1000	Green	Indicates the link speed, either at 1000 Mbps, 100 Mbps, or 10 Mbps.
100
10
Link	Green	When on, indicates that the print server has successfully linked to the network.
Act	Yellow	When blinking, indicates network transmission activity.

ENWW HP Jetdirect Configuration Page 17