HP 640n Print Server Address, Manual Settings Use the Manual Settings menu to, DHCPV6 Policy

Table A-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
		Address	Use this item to manually configure an IPv6 address.
			Manual Settings: Use the Manual Settings menu to
			enable and manually configure a TCP/ IPv6 address.
			Enable: Select this item and choose On to enable
			manual configuration, or Off to disable manual
			configuration.
			Address: Use this item to type a 32 hexadecimal digit
			IPv6 node address that uses the colon hexadecimal
			syntax.
		DHCPV6 Policy	Router Specified: The stateful auto-configuration
			method to be used by the print server is determined
			by a router. The router specifies whether the print
			server obtains its address, its configuration
			information, or both from a DHCPv6 server.
			Router Unavailable: If a router is not available, the
			print server should attempt to obtain its stateful
			configuration from a DHCPv6 server.
			Always: Whether or not a router is available, the print
			server always attempts to obtain its stateful
			configuration from a DHCPv6 server.
		Primary DNS	Use this item to specify an IPv6 address for a primary
			DNS server that the print server should use.
			NOTE: This item will appear only if Manual
			configuration is a higher priority than DHCP in the
			Config Precedence table, configured through the
			embedded Web server.
		Secondary DNS	Use this item to specify an IPv6 address for a
			secondary DNS server that the print server should
			use.
			NOTE: This item will appear only if Manual
			configuration is a higher priority than DHCP in the
			Config Precedence table, configured through the
			embedded Web server.
	Proxy Server		Specifies the proxy server to be used by embedded
			applications in the device. A proxy server is typically
			used by network clients for Internet access. It caches
			Web pages, and provides a degree of Internet
			security, for those clients.
			To specify a proxy server, enter its IPv4 address or
			fully-qualified domain name. The name can be up to
			255 octets.
			For some networks, you may need to contact your
			Independent Service Provider (ISP) for the proxy
			server address.
	Proxy Port		Type the port number used by the proxy server for
			client support. The port number identifies the port
			reserved for proxy activity on your network, and can
			be a value from 0 to 65535.

ENWW HP Jetdirect Menus for Graphical Control Panels 25