HP 640n Print Server manual HP Jetdirect Menus for Classic Control Panels

HP Jetdirect Menus for Classic Control Panels

Classic control panels can typically display two lines of 16 characters each. You must use the available device keys to display and select HP Jetdirect settings. Typically, an asterisk (*) is used to identify the selected value.

Figure A-2Example of Classic Control Panel

Table A-2HP Jetdirect EIO Menu on Classic Control Panel

Menu Item	Description
CFG NETWORK	Selects whether or not you want to access the HP Jetdirect menu.
	NO (default): Bypass the HP Jetdirect menu.
	YES: Access the HP Jetdirect menu. You must change this to YES* each time you want to
	access the menu.
TCP/IP	Identifies whether the protocol stack is enabled or disabled.
IPX/SPX	ON: The protocol is enabled.
DLC/LLC	OFF: The protocol is disabled.
ATALK	NOTE: The factory default setting is Off.
CFG TCP/IP	Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters.
	NO (default): Bypass the TCP/IP menu items.
	YES: Access the TCP/IP menu items.
	● BOOTP=YES* enables IPv4 configuration by a BootP Server.
	● DHCP=YES* enables IPv4 configuration by a DHCP Server.
	If DHCP=YES* and the print server has a DHCP lease, you can choose to configure the
	following DHCP settings:
	◦ RELEASE: Choose YES to release, or NO to save, the current DHCP lease.
	◦ RENEW: Choose YES to renew the current DHCP lease, or NO to not renew the
	DHCP lease.
	● AUTO IP=YES* will automatically assign a link-local IPv4 address in the form
	169.254.x.x.

28 Appendix A HP Jetdirect EIO Control Panel Menus ENWW