Table A-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

 

DHCP Renew

This menu appears if Config Method was set to

 

 

 

DHCP and a DHCP lease for the print server exists.

 

 

 

No (default): The print server does not request to

 

 

 

renew the DHCP lease.

 

 

 

Yes: The print server requests to renew the current

 

 

 

DHCP lease.

 

 

 

 

 

 

Manual Settings

(Available only if Config Method is set to Manual)

 

 

 

Configure parameters directly from the printer control

 

 

 

panel:

 

 

 

IP Address: The unique IP address of the printer

 

 

 

(n.n.n.n).

 

 

 

Subnet Mask: The subnet mask for the printer

 

 

 

(n.n.n.n).

 

 

 

Syslog Server: The IP address of the syslog server

 

 

 

(n.n.n.n) used to receive and log syslog messages.

 

 

 

Default Gateway: The IP address (n.n.n.n) of the

 

 

 

gateway or router used for communications with

 

 

 

other networks.

 

 

 

Idle Timeout: The time period, in seconds, after which

 

 

 

an idle TCP print data connection is closed (default is

 

 

 

270 seconds, 0 disables the timeout).

 

 

 

 

 

 

Default IP

Specify the IP address to default to when the print

 

 

 

server is unable to obtain an IP address from the

 

 

 

network during a forced TCP/IP reconfiguration (for

 

 

 

example, when manually configured to use BootP or

 

 

 

DHCP).

 

 

 

Auto IP: A link-local IP address 169.254.x.x is set.

 

 

 

Legacy: The address 192.0.0.192 is set, consistent

 

 

 

with older HP Jetdirect devices.

 

 

 

 

 

 

Primary DNS

Specify the IP address (n.n.n.n) of a Primary DNS

 

 

 

Server.

 

 

 

NOTE: This item appears only if Manual

 

 

 

configuration is a higher priority than DHCP in the

 

 

 

Config. Precedence table, configured through the

 

 

 

embedded Web server.

 

 

 

 

 

 

Secondary DNS

Specify the IP address (n.n.n.n) of a Secondary

 

 

 

Domain Name System (DNS) Server.

 

 

 

NOTE: This item will appear only if Manual

 

 

 

configuration is a higher priority than DHCP in the

 

 

 

Config. Precedence table, configured through the

 

 

 

embedded Web server.

 

 

 

 

 

IPV6 Settings

Enable

Use this item to enable or disable IPv6 operation on

 

 

 

the print server.

 

 

 

Off: IPv6 is disabled.

 

 

 

On (default): IPv6 is enabled.

 

 

 

 

24 Appendix A HP Jetdirect EIO Control Panel Menus

ENWW

Page 32
Image 32
HP 640n Print Server manual Dhcp Renew, Manual Settings, Default IP, Primary DNS, Secondary DNS, IPV6 Settings Enable