Onkyo TX-NR5007 1, 2, 3, 4, 5, 6, 7

126

NET/USB—Continued

Note:

When modifying network settings, after modifying it is

necessary to execute “Save”.

This section explains how to configure the AV receiver’s

network settings manually.

If your router’s DHCP server is enabled, you don’t need

to change any of these settings, as the AV receiver is set

use DHCP to configure itself automatically by default

(i.e., DHCP is set to Enable). If, however, your router’s

DHCP server is disabled, for example, you’re using

static IP addresses, you’ll need to configure these set-

tings yourself, in which case, a knowledge of Ethernet

networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used

by routers, computers, the AV receiver, and other

devices to automatically configure themselves on a net-

work.

What’s DNS?

The DNS (Domain Name System) translates domain

names into IP addresses. For example, when you enter a

domain name such as www.onkyousa.com in your Web

browser, before accessing the site, your browser uses

DNS to translate this into an IP address, in this case

63.148.251.142.

Note:

This procedure can also be performed on the AV receiver

by using its [SETUP] button, arrow buttons, and

[ENTER] button.

Network Settings

1Press the [RECEIVER] button,

followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make

sure the appropriate external input is

selected on your TV.

2Use the Up and Down [ ]/[ ]

buttons to select “7. Hardware

Setup”, and then press [ENTER].

The “Hardware Setup” menu appears.

7. Hardware Setup

1. Remote ID

2. Multi Zone

3. Tuner

4. HDMI

5. Network

6. Firmware Update

3Use the Up and Down [ ]/[ ]

buttons to select “5. Network”,

and then press [ENTER].

The “Network” screen appears.

4Use the Up and Down [ ]/[ ]

buttons to select the setting, and

use the Left and Right [ ]/[ ]

buttons to set them.

To enter an IP address, select the set-

ting, and then press [ENTER]. The

arrow [ ]/[ ]/[ ]/[ ] buttons can

then be used to enter numbers. Press

[ENTER] again to set the number.

The settings are explained below.

5When you’ve finished, press the

[RETURN] button.

The save confirmation screen appears.

6Use the Up and Down [ ]/[ ]

buttons to select “Save”, and

then press [ENTER].

When modifying network settings,

after modifying it is necessary to exe-

cute “Save”.

7When you’ve finished, press the

[SETUP] button.

The setup menu closes.

7-5. Network

MAC Address

DHCP

IP Address

Subnet Mask

Gateway

DNS Server

Proxy URL

Proxy Port

xx : xx : xx − yy : yy : yy

Enable

aaa.bbb.ccc.ddd

http://www.proxy.xxx.com

8080

Save

Cancel

7-5. Network