55
First Time Setup—Continued

Component Video Input Setup

If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD/BD player to COMPONENT VIDEO IN 2,
you should assign it to the DVD/BD input selector.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are
upconverted* and output by the COMPONENT VIDEO
MONITOR OUT*1. You can set this for each input
selector by selecting the “- - - - -” option.
*1 Only when “Monitor Out” setting is set to “Analog”.
Notes:
For composite video and S-Video upconversion for
the COMPONENT VIDEO MONITOR OUT, the
“Monitor Out” setting must be set to “Analog” (see
page 52), and the “Component Video Input” setting
must be set to “- - - - -”. See page 32 for more
information on video signal flow and upconversion.
If not connected to the same output you have selected
in the “Monitor Out” setting, the “Monitor Out”
setting will be automatically switched to “Analog”
(see page 52).
If you connect an input component (such as UP-A1
Dock that seated iPod) to the UNIVERSAL PORT jack,
you cannot assign any input to PORT selector.
This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Input selector Default assignment
DVD/BD IN1
VCR/DVR -----
CBL/SAT IN2
GAME IN3
AUX1 -----
AUX2 -----
TV/TAPE -----
TUNER ----- (Fixed)
CD -----
PHONO -----
PORT -----
1Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2Use the Up and Down [ ]/[ ] but-
tons to select “1. Input/Output
Assign”, and then press
[ENTER].
The “Input/Output Assign” menu
appears.
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
3Use the Up and Down [ ]/[ ] but-
tons to select “3. Component
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
4Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and then use the Left and Right
[]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
IN3: Select if the video component
is connected to COMPO-
NENT VIDEO IN 3.
-----: Select if you are using the
HDMI outputs, rather than
the COMPONENT VIDEO
OUT, for the output from
composite video, S-Video,
and component video
sources.
5Press the [SETUP] button.
The setup menu closes.
1–3. Component Video Input
IN1
- - - - -
IN2
IN3
- - - - -
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX 1