84
Using the Listening Modes—Continued

Stereo Source (2/2)

: Available Listening Modes
Notes:
*1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the
“Speaker Configuration” setting (see page 95)).
*2 For 9ch output, output can be switched between the combination of Surround back and Front high, or Surround back and Front wide
speakers by pressing the [SP LAYOUT] button.
*3 If there are no surround back speakers, or Powered Zone 3 is being used, Dolby Pro Logic II is used.
*4 This listening mode can be selected only when all the following conditions are satisfied:
a. Center speaker is connected to the AV receiver.
b. Either of Front High speakers or Front Wide speakers is connected to the AV receiver.
Output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the “Speaker
Configuration” setting (see page 95)).
*5 This listening mode is not available while you are using Zone 2 (“Not Available” will appear on the display). If you turn Zone 2 on during
the Pure Audio listening mode, the listening mode will change to Direct.
Available sampling rate for PCM input signal is 32/44.1/48/88.2/96/176.4/192kHz.
The listening modes cannot be selected with some source formats.
Listening Mode Button
Speaker layout
PLII/PLIIx
Game*3
THX Games
✔✔
PLII/PLIIx Game
Audyssey DSX*4*2
PLllz Height
THX Games
Neural THX
Games
PLII Game THX
Ultra2 Games
PLIIz Height THX
Ultra2 Games
Orchestra *1*2
Unplugged *1*2
Studio-Mix *1*2
TV Logic *1*2
Game-RPG *1*2
Game-Action *1*2
Game-Rock *1*2
Game-Sports *1*2
All Ch Stereo ✔✔
*1*2
Full Mono ✔✔
*1*2
T-D (Theater-
Dimensional) ✔✔✔✔
Neo:6 Cinema
DTS Surround
Sensation
✔✔✔✔
Neo:6 Music
DTS Surround
Sensation
✔✔✔✔
LH RH
SBRSBL
FL FR
LW RW
C
SL SR
SW SW
LH RH
SBRSBL
FL FR
LW RW
C
SL SR
SW SW
LH RH
SBRSBL
FL FR
LW RW
C
SL SR
SW SW
LH RH
SBRSBL
FL FR
LW RW
C
SL SR
SW
*1 *1
*2*2
*1 *1 *2*2
*2 *2
SW