Onkyo TX-NR5007 Video Input Setup

First Time Setup—Continued

HDMI Input Setup

If you connect a video component to HDMI IN, you

must assign that input to an input selector. For example,

if you connect your DVD/BD player to HDMI IN 1, you

must assign HDMI IN 1 to the DVD/BD input selector.

If you’ve connected your TV to the AV receiver with an

HDMI cable, you can set the AV receiver so that

composite video, S-Video, and component video sources

are upconverted* and output by the HDMI output. You

can set this for each input selector by selecting the

“-----” option.

Notes:

• For composite video, S-Video, and component video

upconversion for the HDMI output, the “Monitor Out”

setting must be set to other than “Analog” (see

page 52), and the “HDMI Input” setting must be set to

“- - - - -”. See page 32 for more information on video

signal flow and upconversion.

• If no video component is connected to HDMI output

(even if the HDMI input is assigned), the AV receiver

selects the video source based on the setting of

Component Video Input.

• When an HDMI IN is assigned to an input selector, the

AV receiver will select audio from HDMI IN as a pri-

ority. See “Digital Audio Input Setup” on page 56.

• The TUNER input selector cannot be assigned and is

fixed at the “- - - - -” option.

• If you connect an input component (such as UP-A1

Dock that seated iPod) to the UNIVERSAL PORT

jack, you cannot assign any input to PORT selector.

• Do not assign the component connected with the

HDMI input to the TV/TAPE selector when you set

“TV Control” setting to “On” (see page 114).

Otherwise, appropriate CEC (Consumer Electronics

Control) operation is not guaranteed.

• This procedure can also be performed on the AV

receiver by using its [SETUP] button, arrow buttons,

and [ENTER] button.

Video Input Setup

1Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make

sure the appropriate external input is

selected on your TV.

2Use the Up and Down [ ]/[ ] but-

tons to select “1. Input/Output

Assign”, and then press

[ENTER].

The “Input/Output Assign” menu

appears.

3Use the Up and Down [ ]/[ ] but-

tons to select “2. HDMI Input”,

and then press [ENTER].

The “HDMI Input” menu appears.

OUT

Composite video, S-Video,

component video

Composite video, S-Video,

component video

HDMI

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3. Component Video Input

4. Digital Audio Input

5. Analog Audio Input

1–2. HDMI Input

DVD/BD

VCR/DVR

CBL/SAT

GAME

AUX 1

HDMI1

HDMI2

HDMI3

HDMI4

FRONT

4Use the Up and Down [ ]/[ ] but-

tons to select an input selector,

and use the Left and Right [ ]/

[] buttons to select:

HDMI1, HDMI2, HDMI3, HDMI4,

HDMI5, HDMI6,

HDMI7 (TX-NR5007):

Select the HDMI IN to which

the video component has

been connected.

-----: Output composite video,

S-Video, and component

video sources from the HDMI

outputs. The video output sig-

nal from the HDMI outputs is

the one configured in “Com-

ponent Video Input Setup”

(see page 55).

• Each HDMI IN cannot be assigned to

more than one input selector. When

HDMI IN have already been

assigned, you must set first any

unused input selectors to “- - - - -” or

you will be unable to assign HDMI

IN to input selector.

• “AUX 1” is used only for digital

input from the front panel terminals.

5Press the [SETUP] button.

The setup menu closes.