21
Connecting the AV receiver—Continued

Connecting the Speaker Cables

9.2-channel Playback with Speakers A
The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one
surround back speaker, connect it to the SURR BACK/ZONE 3 L terminal.
1Strip 1/2" to 5/8" (12 to
15 mm) of insulation
from the ends of the
speaker cables, and
twist the bare wires
tightly, as shown.
2Unscrew the terminal.
1/2" to 5/8"
(12 to 15 mm) 3Fully insert the bare
wires.
4Screw the terminal tight.
Surround
back left
speaker
Surround
back right
speaker
Surround
left
speaker
Surround
right
speaker
Front high
left
speaker
Front high
right 
speaker
Front left
speaker A
Front right
speaker A
Center
speaker
Front wide
right
speaker
Front wide left
speaker