Bass, Treble: Adjust volume of the front speaker.
•It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
PM Bass (Phase Matching Bass): Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained.
•It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
Subwoofer Level, Center Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode.
•The speakers cannot be adjusted if they have been set to "No" or "None" in "Sp Config".
AccuEQ: Disables the sound field correction settings set in the automatic speaker setting. The setting can be separately set to each input.
•The setting cannot be selected if the automatic speaker setting has not been performed.
•It cannot be set if headphones are connected or the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while watching a movie late night. You can enjoy the effect on Dolby Digital, Dolby Digital Plus and Dolby TrueHD sources only.
•Turning the unit to standby mode will set the setting to "Off". In case of Dolby TrueHD, the setting will be set to "Auto".
Music Optimizer : Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input.
•The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals.
•It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
Cinema Filter: Adjust the soundtrack that was processed to enhance its high pitch range, in order to make it suitable for home theater.
•This function can be used in the following listening modes: Multichannel, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS,
Information: Display the audio information.
Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC" and "GAME".
• It cannot be set when audio is played from the TV's speakers.
6 Using the ZONE function
You can connect the unit with a
•As for the "NET", "USB" and "BLUETOOTH", you cannot select different inputs for the main room and separate room. For example, if "NET" has been selected in the main room and then "USB" is selected on the
•When listening to AM/FM broadcasting, you cannot select different stations for the main room and separate room. Therefore broadcasting of the same station will be heard in the both rooms.
Making ZONE connection
Connect the ZONE 2 LINE OUT jacks of the unit and the
Step 3: Playing Back
Performing ZONE playback
1.Press ZONE2 on the remote controller, point the remote controller at the remote controller sensor and press zRECEIVER.
"Z2" lights on the unit and the ZONE function is enabled. (ZONE 2 is now on.)
2.Press ZONE2 on the remote controller again and press INPUT SELECTOR of the input to be played in a separate room.
To play the same source in the main room and separate room, hold down ZONE2 for approximately 3 seconds. The volume should be adjusted with the
amplifier used in the separate room.
¼¼To control ZONE playback on the main unit, press ZONE2 and within 8 seconds, press the input selector button of the input to be played in a separate room. To play the same source in the main room and separate room, press ZONE2 twice. "Z2 : Source" appears on the unit's display.
To turn off the ZONE function: Press ZONE2 on the remote controller and press zRECEIVER. Alternatively press OFF on the main unit.
•If ZONE 2 is on, power consumption during standby becomes larger than normal.
•If ZONE 2 is turned on when the listening mode of the main room is Pure Audio, it will automatically switch to Direct. (European, Australian and Asian models)
•While ZONE 2 is on, the RI linked system function (interlink between Onkyo components) is disabled.
13
